roduct center
The machine is applicable for grinding scrap rubber.
1、The roller is made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. Both the front roller and the back roller are fluted. The internal cavity of the roller is processed to make temperature well proportioned on the roller surface.
2、The machine is equipped with an overload protection device to prevent the main components from being damaged due to overloading.
3、The machine is also equipped with an emergency accident happens, just draw the safety pull-rod, and the machine will stop immediately. It is safe and reliable.
Type | ZKF-480A | ZKF-480B | ZKF-480D | |
Working Diameter of Front Roll(mm) | 480 | 480 | 480(Fluted) | |
Working Diameter of Back Roll(mm) | 610 | 610 | 610(Fluted) | |
Working Length of Rolls (mm) | 800 | 800 | 800(Fluted) | |
Linear Speed of Front Roll(m/min) | 22 | 22 | 22 | |
Linear Speed of Front/Rear Rolls | 1:2.1 | 1:2.1 | 1:2.1 | |
Max. Nip | 15 | 15 | 15 | |
Capacity (Kg/h) | 150 | 150 | 150 | |
Motor Power(KW) | 75 | 75 | 110 | |
Speed Reducer | Inverted-Y Speed Reducer | NGW Planetary Hard-Gear Speed Reducer | ||
Overall Dimensions(mm) | Length | 5450 | 5500 | 6280 |
Width | 2450 | 2330 | 2330 | |
Height | 1780 | 1780 | 2100 | |
Weight(KG) | 17000 | 19500 | 20000 | |
